ENFEncino Fencing

Chain Link Fence Installation

Chain link fencing in Encino, California

Chain link is the practical, economical fence: a galvanized or vinyl-coated run for a back property line, a dog run, a canyon-side boundary, or a job site. It is not estate frontage, and we will tell you where it fits and where it does not.

What an Encino chain link fence costs and involves. Figure $18 to $40 per linear foot installed, the lowest of any material. It secures a boundary or a pet run at a fraction of the cost of wood or iron. Black vinyl-coated mesh recedes into a hillside far better than raw galvanized, which is why it is common on the canyon-side lines south of the Boulevard.
Black vinyl-coated chain link fence along a canyon-side property line in Encino Hills
Black vinyl-coated chain link on a canyon-side line in Encino Hills, receding into the slope.

Where chain link fits in Encino

Chain link earns its place where cost and function matter more than looks. It is the right fence for a back property line, a dog run, a canyon-side boundary you do not need to hide, a large parcel that would be expensive to enclose in anything else, and a temporary run around a construction or landscaping project. What it is not is estate frontage. Along a visible street north of the Boulevard, ornamental iron or a wood or vinyl privacy fence is the finished choice, and we will say so.

Where it does fit, chain link is hard to beat: it secures a boundary and contains pets or children at a fraction of the cost of any other material, and it goes up fast.

Galvanized or vinyl-coated

Two finishes cover almost every Encino chain link job:

  • Galvanized. The standard silver mesh, the most economical, and the usual pick for a side yard, a dog run, or a job site.
  • Black or green vinyl-coated. A coated mesh that recedes visually, which is why it is common on the canyon-side lines south of the Boulevard where a raw silver fence would stand out against the hillside.

We also match the gauge and mesh size to the job, a heavier gauge and smaller mesh for security or a large dog, and add privacy slats or a windscreen where you want to close the fence off. The coating is worth it on a long or visible run, both for the look and because it slows corrosion.

Galvanized chain link dog run in an Encino side yard
A galvanized side-yard dog run with woven privacy slats.

Chain link on a hillside and a large lot

Chain link follows a grade cleanly, which makes it a practical way to enclose a hillside or an oversized Encino lot. The top rail steps or slopes with the ground, terminal and corner posts are braced against the pull of the mesh, and on a canyon-side line we set posts firmly so the fence holds tension over a long run. For a homeowner who needs to secure a big parcel south of the Boulevard without the cost of iron all the way around, a coated chain link boundary with iron or wood only at the visible frontage is often the sensible mix.

Privacy slats, coating, and gates

A chain link fence does not have to be see-through. Woven privacy slats or a windscreen turn a back run into a real visual barrier, useful along a pool equipment area or a work yard. We hang matching walk gates and rolling or cantilever gates for a driveway or a side access, sized and braced for daily use. With the right coating, gauge, and gate hardware, a chain link fence is a long-lasting, low-cost boundary that does exactly the job you need and no more.

Chain link fence pricing in Encino

Run lengthTypical installed rangeCommon on
75 linear ft$1,350 to $3,000A side yard or dog run
150 linear ft$2,700 to $6,000A back line or large lot section
250 linear ft$4,500 to $10,000A full perimeter on a large parcel

Everything is in there: posts, mesh, top rail, hardware, labor. Vinyl coating, a heavier gauge, privacy slats, and gates move you up the range. Pricing in detail is on Encino fence cost guide.

Get a written chain link price

We look at the line, the terrain, and the gates you need, and leave you with a fixed written chain link quote. Free, with no obligation.

Request an estimate

Chain link fence questions

How much does a chain link fence cost in Encino?

Chain link runs about $18 to $40 per linear foot installed, the least expensive fence we build. A dog run or a short side yard sits at the low end, while a coated, heavier-gauge run with gates and privacy slats sits higher. It is the value choice for a back line rather than a visible frontage.

Galvanized or vinyl-coated chain link?

Galvanized silver mesh is the most economical and is fine for a side yard or a job site. Black or green vinyl-coated mesh costs a little more, recedes against a hillside, and slows corrosion, which is why it is the usual pick for a canyon-side line south of the Boulevard or any long, visible run.

Can a chain link fence be private?

Yes, to a point. Woven privacy slats or a windscreen turn a chain link run into a real visual barrier, which works well around a pool equipment area, a work yard, or a dog run. For full backyard privacy, though, a solid wood or vinyl panel is the better tool.

Is chain link a good fit for a hillside or large lot?

It is. Chain link follows a grade cleanly, with the top rail stepping down the slope and terminal posts braced for the pull of the mesh, so it is an economical way to secure a hillside or oversized Encino parcel. Many homeowners run coated chain link on the back lines and reserve iron or wood for the visible frontage.

Keep reading

Start at residential fencing in Encino and work down from there.